Post-Collision Air Bag Safety Inspection

POST-COLLISION AIR BAG SAFETY INSPECTION

Action

Components

Replace After Deployment

⁽¹⁾ Air Bag Module(s) ⁽¹⁾ SRS Control Unit ⁽²⁾

Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy)

⁽¹⁾ Clockspring ⁽¹⁾ Combination Switch ⁽¹⁾ Impact Sensors ⁽¹⁾ SRS Control Unit ⁽¹⁾ Steering Column Assembly ⁽¹⁾ Steering Wheel ⁽¹⁾ Wiring Harness

⁽¹⁾	DO NOT attempt SRS wiring repairs. If any components are damaged or bent, they must be replaced.

⁽²⁾	1995-96 Legacy Only