LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL & 2.2L 4-CYL Turbo - VIN [6] >> Removal & Installation >> Cylinder Block Assembly >> Cylinder Block Disassembly

Cylinder Block Disassembly

  1. Set up cylinder block so cylinders No. 1 and 3 are on upper side. Remove cylinder block connecting bolts. Separate left and right cylinder blocks. DO NOT  allow connecting rod to fall and damage block.
  2. Remove rear oil seal. Remove crankshaft together with connecting rod. Remove crankshaft bearings from cylinder block using hammer handle. Ensure bearings are marked for proper location. Draw out each piston from cylinder block.
scientia non olet · About LEMON Manuals