LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL & 2.2L 4-CYL Turbo - VIN [6] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Apply a coat of clean engine oil to both camshaft journals. Install camshaft journal. Install "O" ring to camshaft support. Install camshaft support.
  2. Apply grease to NEW oil seal lips. Using Oil Seal Guide (499597000) and Oil Seal Installer (499587100), install oil seal on camshaft support. To complete installation, install rocker cover, timing belt, camshaft sprockets and related parts. Perform necessary adjustments.
scientia non olet · About LEMON Manuals