LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL & 2.2L 4-CYL Turbo - VIN [6] >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

  1. Measure bend. Bend limit is .001" (.03 mm). Check cam face condition. Remove minor burrs by grinding using oil stone. Check cam height and journal for damage wear.
  2. Measure outside diameter of camshaft journal and inside diameter of cylinder head journal to determine camshaft oil clearance. If clearance is not as specified, replace camshaft or cylinder head as necessary. See CAMSHAFT SPECIFICATIONS  table under ENGINE SPECIFICATIONS.
  3. Measure camshaft end play. See CAMSHAFT SPECIFICATIONS  table. If end play is not as specified, replace camshaft support.
scientia non olet · About LEMON Manuals