LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL & 2.2L 4-CYL Turbo - VIN [6] >> Overhaul >> Piston & Rod Assembly Installation

Piston & Rod Assembly Installation

  1. Ensure piston ring end gap and side clearance are within specification. See PISTONS, PINS & RINGS SPECIFICATIONS  table under ENGINE SPECIFICATIONS. Install rings on piston with "R" mark toward top of piston. Lubricate piston, rings and cylinder bore with engine oil.
  2. Properly space ring end gaps on piston. See Fig 1 . Bend pawl of upper rail over and install it in piston hole. Install piston into cylinder bore.
Fig 1: Positioning Piston Rings
G91F02407Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals