LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL & 2.2L 4-CYL Turbo - VIN [6] >> Overhaul >> PISTON & Rod Assembly Inspection

PISTON & Rod Assembly Inspection

  1. Inspect piston for cracks or damage in ring areas. Check ring side clearance. Measure piston pin O.D. and piston pin bore I.D. Replace piston if measurements are not within specification.
  2. See PISTONS, PINS & RINGS SPECIFICATIONS  and CONNECTING RODS tables under ENGINE SPECIFICATIONS. Ensure piston pin can be installed in piston at 68°F (20°C). Replace components if piston pin cannot be installed.
scientia non olet · About LEMON Manuals