Camshaft Specifications
CAMSHAFT SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| End Play | |||
| Standard | .0012-.0102 (.030-.260) | ||
| Service Limit | .00138 (.0350) | ||
| Journal Runout | .0010 (.025) | ||
| Oil Clearance | |||
| Standard | .0022-.0035 (.055-.090) | ||
| Service Limit | .0039 (.100) | ||
| Lobe Height | |||
| Non-Turbo | |||
| Standard | 1.2702-1.2781 (32.264-32.464) | ||
| Service Limit | 1.2642 (32.110) | ||
| Turbo | |||
| Standard | 1.2711-1.2750 (32.286-32.386) | ||
| Service Limit | 1.2641 (32.04) | ||