LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy Sport >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axle - 4WD Rear Drive Axle >> Removal, Disassembly, Reassembly & Installation >> Drive Axle Shafts >> Installation (Legacy)

Installation (Legacy)

  1. Using Installer (9224310000 ) and Adapter (927390000 ), install outboard joint into rear housing. See Fig 1 . Install, but DO NOT  tighten new axle shaft nut. Install inboard joint to differential using NEW retaining spring pin.
    Fig 1: Installing Axle Shaft In Rear Housing (Legacy)
    G92D01402Courtesy of SUBARU OF AMERICA, INC.
  2. To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals