LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy LSi, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Description & Operation

Description & Operation

Instrument cluster case can be removed and disassembled to service speedometer, gauges, warning (indicator) lights and printed circuit. SeeFig 1 and Fig 2 . Gauges use variable resistance sending units. See SENDING UNIT LOCATIONS  . Low fuel warning light sensor in fuel tank sending unit provides ground for low fuel warning light bulb (if equipped).

SENDING UNIT LOCATIONS

Application Location
Oil Pressure Sending Unit
Justy & Legacy On Crankcase, Near Alternator
Loyale Near Oil Filter
SVX Near Camshaft Angle Sensor
Temperature Gauge Sending Unit
Justy Below Distributor Or Below Throttle Body
Legacy At Center Of Engine, Near By-Pass Air Control Valve
Loyale On Right Side Of Engine
SVX Below Left Air Intake Plenum Tubes, Near Back Of Engine
NOTE: Exploded view of Legacy and SVX instrument clusters is not available from manufacturer.
Fig 1: Exploded View Of Instrument Cluster (Loyale)
G91E03915Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Exploded View Of Instrument Cluster (Justy)
G68155Courtesy of SUBARU OF AMERICA, INC.