LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1991 >> Legacy LSi, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Rotor >> Installation

Front Rotor: Installation

  1. To install, reverse removal procedure. Tighten hub-to-rotor bolts evenly and to specification. See TORQUE SPECIFICATIONS TABLE at end of article.
  2. On Justy, tighten wheel bearing/axle nut to 130 ft. lbs. (177 N.m). On all other models, tighten axle shaft nut to 145 ft. lbs. (196 N.m). Depress brake pedal several times to seat pads.
scientia non olet · About LEMON Manuals