LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1991 >> Legacy LSi, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Rear Caliper >> Reassembly

Rear Caliper: Reassembly

  1. Wash caliper bore and piston with brake fluid. Install piston seal into caliper seal groove, ensuring seal is not twisted. Apply caliper lubricant to piston seal and caliper bore. Install boot top onto bottom of piston.
  2. Apply caliper lubricant lightly inside of piston boot. Install bottom of boot into caliper top groove and push piston into caliper bore by hand. Ensure dust boot is positioned into groove correctly and is not twisted.
scientia non olet · About LEMON Manuals