Rear Brake Shoes: Installation

Ensure adjuster is not damaged or worn. Ensure Yellow strut is on right side. White strut should be on left side. Preset adjuster to 3.78" (96 mm). See Fig 1 . To install, reverse removal procedure. See Fig 2 .

Fig 1: Presetting Brake Shoe Adjuster (Justy)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Identifying Rear Brake Components (Justy)

Courtesy of SUBARU OF AMERICA, INC.

To install, reverse removal procedure. On 4WD models, retract adjuster. Return springs are not interchangeable. Lower spring is larger in diameter. Adjust brakes and bleed hydraulic system.