LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1989 >> XT 1.8 5 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL & 1.8L 4-CYL Turbo - VINS [4,5,7] >> Removal & Installation >> Cylinder Head >> Inspection

Cylinder Head: Inspection

Check cylinder head warpage and height. Resurface head if warpage exceeds specification. See CYLINDER HEAD SPECIFICATIONS table. Replace cylinder head if not within specification after resurfacing.

CYLINDER HEAD SPECIFICATIONS

Application In. (mm)
Grind Limit .012 (.30)
Height 3.567 (90.60)
Maximum Warpage .002 (.05)
scientia non olet · About LEMON Manuals