LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1989 >> XT 1.8 5 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL & 1.8L 4-CYL Turbo - VINS [4,5,7] >> Overhaul >> Water Pump >> Installation

Water Pump: Installation

To install, reverse removal procedure using new gasket. Coat crankshaft pulley bolt with oil prior to installation. Tighten bolts to specification.

NOTE: For further information on cooling systems, see ENGINE COOLING article in this section.
scientia non olet · About LEMON Manuals