LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1989 >> XT 1.8 5 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL & 1.8L 4-CYL Turbo - VINS [4,5,7] >> Overhaul >> Cylinder Block >> Inspection

Cylinder Block: Inspection

  1. Inspect cylinder block for cracks, warpage, bore taper and out-of-round. Replace or repair cylinder block if not within specification.
  2. Measure piston skirt diameter with temperature of 68°F (20°C). Piston skirt diameter should be measured at 90 degree angle to piston pin at designated distanced from bottom of piston skirt.
  3. Measure at .787" (19.98 mm) for XT Coupe and non-turbo models or 1.059" (26.90 mm) on turbo models. Clearance between piston and cylinder bore must be within specification. See ENGINE SPECIFICATIONS tables.
scientia non olet · About LEMON Manuals