| Backing Plate Mounting Bolts |
| Justy |
14-22 (19-30) |
| All Others |
34-43 (46-58) |
| Booster Mounting Nut |
9-17 (12-23) |
| Brake Line-to-Caliper |
12-14 (16-19) |
| Brake Line-to-Master Cylinder |
10-13 (14-18) |
| Brake Line-to-Wheel Cylinder |
10-13 (14-18) |
| Caliper Guide Pin |
33-40 (45-54) |
| Caliper Pin Bolt |
| Justy |
16-23 (22-31) |
| All Others |
23-30 (31-41) |
| Caliper-to-Support Bolt |
| Rear |
16-23 (22-31) |
| Hub-to-Rotor Bolt |
33-42 (45-57) |
| Master Cylinder Mounting Nut |
7-13 (10-18) |
| Support Bracket Mounting Bolts |
| Front |
36-51 (49-69) |
| Rear |
34-43 (46-58) |
| Wheel Bearing Nut |
| Front |
| Justy |
130 (177) |
| All Others |
145 (196) |
| Rear |
| 2WD |
| Justy |
| Step One |
29 (39) |
| Step Two |
Lossen Nut |
| Step Three |
Tighten Until Starting Torque is 3.1-4.4 Lbs. (1.4-3.2 kg) |
| All Others |
| Step One |
36 (49) |
| Step Two |
Lossen Approximately 1/8 Turn |
| Step Three |
Starting Torque Should Be 1.87-3.20 Lbs. (.85-1.45 kg) |
| 4WD |
| Justy |
108 (147) |
| All Others |
145 (196) |
| Wheel Lug Nut |
58-72 (79-98) |
| INCH Lbs. (N.m) |
| Master Cylinder Stop Bolt |
12-24 (1.4-2.7) |