Rear Brake Shoes: Installation

Ensure adjuster is not damaged or worn. Ensure Yellow strut is on right side. White strut should be on left side. Preset adjuster to 3.78" (96 mm). See Figure . To install, reverse removal procedure. See Figure .

To install, reverse removal procedure. On 4WD models, retract adjuster. Return springs are not interchangeable. Lower spring is larger in diameter. Adjust brakes and bleed hydraulic system.

Fig 1: Presetting Adjuster (Justy)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Exploded View of Rear Brake Assembly (Justy)

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Exploded View of Rear Drum Brake Assembly (2WD Models)

Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Exploded View of Rear Drum Brake Assembly (4WD Models)

Courtesy of SUBARU OF AMERICA, INC.