Fuel Tank Sending Unit Test

Remove and unplug fuel tank sending unit. With float at empty position, use an ohmmeter and measure sender resistance. Resistance should indicate 7 ohms. With float at 1/2 full position, sending unit resistance should indicate 33 ohms. With float at full position, sending unit resistance should indicate 95 ohms.

Fig 1: View of Instrument Cluster Assembly (Coupe (3-Door), Sedan & Station Wagon)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: View of Instrument Cluster Assembly (XT Coupe & XT6)

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: View of Instrument Cluster Assembly (Justy)

Courtesy of SUBARU OF AMERICA, INC.