Trip Computer

Trip computer contains a self-diagnostic function to check for malfunction of circuitry or display. Pressing the "CLOCK", "ALARM" and "ARRIVE" buttons at the same time will light up all 7 segments for 3 seconds. After 3 seconds, each digit counts down from 9-0 (zero), pausing for .5 second. At this time, the other various displays will flash alternately. The self-diagnostic function is canceled after one cycle or if another button is pushed. The self-diagnostic function is ended when figures "0000" are displayed, ignition switch is turned off, and function switch is turned on. When self-diagnostic function is ended, display changes to "CLOCK" mode.

Fig 1: Cluster Assembly Trouble Shooting Charts (1 of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Cluster Assembly Trouble Shooting Charts (2 of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Speedometer & Temp Gauge Trouble Shooting Charts

Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Fuel Gauge & Tachometer Trouble Shooting Charts

Courtesy of SUBARU OF AMERICA, INC.

Fig 5: Trip Computer Trouble Shooting Charts (1 of 6)

Courtesy of SUBARU OF AMERICA, INC.

Fig 6: Trip Computer Trouble Shooting Charts (2 of 6)

Courtesy of SUBARU OF AMERICA, INC.

Fig 7: Trip Computer Trouble Shooting Charts (3 of 6)

Courtesy of SUBARU OF AMERICA, INC.

Fig 8: Trip Computer Trouble Shooting Charts (4 of 6)

Courtesy of SUBARU OF AMERICA, INC.

Fig 9: Trip Computer Trouble Shooting Charts (5 of 6)

Courtesy of SUBARU OF AMERICA, INC.

Fig 10: Trip Computer Trouble Shooting Charts (6 of 6)

Courtesy of SUBARU OF AMERICA, INC.