Fuel & Temperature Gauges
Disconnect sending unit connector. Connect appropriate resistor to connector wire, and ground resistor to body. Gauge should illuminate number of segments indicated in GAUGE RESISTANCE CHECK table.
GAUGE RESISTANCE CHECK
| Ohms | Segments Illuminated | |
|---|---|---|
| Fuel Gauge | ||
| 7 Ohms | 10 | |
| 62 Ohms | 5 | |
| 97-101 Ohms | 1-2 | |
| Temperature Gauge | ||
| 13-17 Ohms | 9-10 | |
| 20-30 Ohms | 5-6 | |
| 150-200 Ohms | 1-2 | |