LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1988 >> XT DL >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Combination Switch

Combination Switch

  1. Remove steering column bracket bolts and pull down steering column. Remove screws from backside of steering wheel. Disconnect wires from horn switch connector.
  2. Remove horn pad and steering wheel. Remove steering column cover screws. Unplug wiring connectors. Remove combination switch. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals