LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1988 >> Justy RS >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Bearing >> Installation

Wheel Bearing: Installation

  1. Inspect brake drum, races and spindle for unusual wear, cracks or damage. Press bearing outer races into drum using Installer (922111000). Pack bearings with grease and install. Press oil seal in using installer.
  2. To install, reverse removal procedure. Ensure spacer is installed with chamfered side facing in. Always use new lock washer. Adjust wheel bearing.
scientia non olet · About LEMON Manuals