Push Rods
Check for damage and runout. Runout limit is .016" (.4 mm). Replace as necessary. Check oil hole for clogging and wear. Measure overall length of push rods. See PUSH ROD LENGTH table.
PUSH ROD LENGTH
| Application | In. (mm) | |
|---|---|---|
| 1.6L | 8.62-8.64 (219.0-219.4) | |
| 1.8L | ||
| Solid Lifters | 9.08-9.10 (230.7-231.1) | |
| Hydraulic Lifters | 9.12-9.14 (231.7-232.2) | |
- Check for damage and runout. Runout limit is .016" (.4 mm). Replace as necessary. Check oil hole for clogging and wear.
- Measure overall length of push rods. For 1.6L engines, length measurement should read 8.62-8.64" (219.0-219.4 mm). For 1.8L engines with solid lifters, length measurement should read 9.08-9.10" (230.7-231.1 mm). For 1.8L engines with hydraulic lifters, length measurement should read 9.12-9.14" (231.7-232.2 mm).