LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1987 >> XT GL, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [2] & 1.8L 4-CYL - VINS [4,5] - OHV >> Overhaul >> Camshaft End Thrust Check

Camshaft End Thrust Check

Measure thrust clearance between camshaft and camshaft plate. Standard clearance is .0008-.0035" (.02-.09 mm). If clearance exceeds limit of .008" (.20 mm), replace camshaft plate.

scientia non olet · About LEMON Manuals