Oil Pump: Installation
Install oil filter on pump. Reverse removal procedure to complete installation.
OIL PUMP SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Drive Gear O.D. | 1.169-1.171 (29.70-29.74) | |
| Outer Rotor-to-Body Clearance | .001-.005 (.03-.13) | |
| Relief Valve Spring Free Length | ||
| 1.6L | 1.602 (40.7) | |
| 1.8L | 1.461 (37.1) | |
| Rotor O.D. | 1.596-1.597 (40.53-40.56) | |
| Rotor Side Clearance | .006-.008 (.15-.21) | |
| Rotor-to-Drive Gear Clearance | .001-.005 (.03-.12) | |