LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1987 >> XT GL, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Electronic Suspension >> Suspension - Electronic >> Removal & Installation >> Strut Assembly >> Removal (Rear)

Removal (Rear)

  1. Remove rear apron protector. Remove rear solenoid valve and support away from work area. Remove height sensor harness from access hole in body and detach harness coupler.
  2. Remove strut assembly as a unit using extreme care not to damage diaphragm discharge pressure from unit if it is to be disassembled.
scientia non olet · About LEMON Manuals