Installation (Justy)
To install, reverse removal procedure. Tighten wheel bearing nut to 29 ft. lbs. (39 N.m). Back nut off then tighten nut until starting torque, measured with a spring scale, is 3.1-4.4 lbs. (1.4-2.0 kg).
To install, reverse removal procedure. Tighten wheel bearing nut to 29 ft. lbs. (39 N.m). Back nut off then tighten nut until starting torque, measured with a spring scale, is 3.1-4.4 lbs. (1.4-2.0 kg).