Fuel & Temperature Gauges
Disconnect connector from sending unit. Connect the appropriate resistor to connector wire, and ground resistor to body. Gauge should illuminate the number of segments indicated in FUEL GAUGE RESISTANCE CHECK or TEMPERATURE GAUGE RESISTANCE CHECK table
FUEL GAUGE RESISTANCE CHECK
| Ohms | Segments Illuminated |
|---|---|
| 7 Ohms | 10 |
| 62 Ohms | 5 |
| 97-101 Ohms | 1-2 |
TEMPERATURE GAUGE RESISTANCE CHECK
| Ohms | Segments Illuminated |
|---|---|
| 13-17 Ohms | 9-10 |
| 20-30 Ohms | 5-6 |
| 150-200 Ohms | 1-2 |