LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1986 >> RX >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL & 1.8L 4-CYL Turbo - VINS [4,5,7] >> Engine Oiling System >> Water Pump >> Installation

Water Pump: Installation

Install water pump, new gasket, drive belt and hoses. Gradually tighten bolts alternately and evenly in several steps to prevent leakage. The clamps for the lower radiator hose should be positioned properly to prevent interference with drive belts.

NOTE: For further information on cooling systems, refer to the appropriate article in the ENGINE COOLING section. See the following menu.
scientia non olet · About LEMON Manuals