LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1986 >> RX >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustment >> Stop Light Switch

Stop Light Switch

  1. Stop light switch is located under instrument panel, above brake pedal. To adjust stop light switch, loosen lock nut and position switch so contact plunger touches pedal arm stopper.
  2. Check operation of switch. Brake lights should glow when contact plunger moves .07-.13" (1.8-3.3 mm). If not, adjust switch and tighten lock nut.
scientia non olet · About LEMON Manuals