LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1985 >> XT GL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [2] & 1.8 4-CYL - VINS [4,5] >> Removal & Installation >> Valve Stem Oil Seals

Valve Stem Oil Seals

Valve stem oil seals are used only on intake valve guides. Remove old seal from valve guide. Using Oil Seal Installer (898858600), replace with a new seal. When fully installed, oil seal will measure .913" (23.2 mm) from cylinder head surface to top of oil seal. When inserting valve stem, use care not to damage seal.

scientia non olet · About LEMON Manuals