LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1985 >> XT GL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [2] & 1.8 4-CYL - VINS [4,5] >> Removal & Installation >> Exhaust Manifold >> Removal

Exhaust Manifold: Removal

  1. Remove hot air preheat tube from exhaust pipe. Disconnect O2 sensor harness. Remove nuts which secure front exhaust manifold to exhaust port of engine.
  2. Remove bolts connecting front exhaust pipe to rear exhaust pipe. Remove bolt connecting front exhaust pipe to support bracket at transmission.
scientia non olet · About LEMON Manuals