LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1985 >> XT GL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [2] & 1.8 4-CYL - VINS [4,5] >> Removal & Installation >> Camshaft

Removal & Installation: Camshaft

Camshaft may be removed when crankcase has been separated. Check for wear or damage. Replace camshaft if necessary. Using a dial indicator, ensure bend does not exceed .002" (.05 mm).

NOTE: If camshaft is replaced, all valve lifters should also be replaced. Check identification marks. The 1.6L engine uses camshaft marked "51", while 1.8L engine with solid lifters uses camshaft marked "72". 1.8L engine with hydraulic lifters uses camshaft marked "76".
scientia non olet · About LEMON Manuals