Oil Pump: Installation
Install oil filter on pump. Reverse removal procedure to complete installation.
OIL PUMP SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| Rotor-to-Drive Gear Clearance | .0008-.0047 (.02-.12) |
| Outer Rotor-to-Body Clearance | .0012-.0051 (.03-.13) |
| Rotor Side Clearance | .0059-.0083 (.15-.21) |
| Drive Gear O.D. | 1.1693-1.1709 (29.70-29.74) |
| Rotor O.D. | 1.5957-1.5968 (40.53-40.56) |
| Relief Valve Spring Free Length | 1.854 (47.1) |