LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1985 >> XT GL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [2] & 1.8 4-CYL - VINS [4,5] >> Engine Lubrication >> Oil Pump >> Inspection

Oil Pump: Inspection

  1. Measure rotor-to-drive gear and rotor-to-body clearance. Measure rotor side clearance and measure diameters of rotor and drive gear. Replace any component that exceeds wear limits.
  2. Inspect relief valve spring, valve and pump body for wear or damage.
NOTE: Make sure oil pump shaft is aligned with slot in camshaft when reassembling.
scientia non olet · About LEMON Manuals