LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1985 >> XT GL-10, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L OHC 4-CYL & 1.8L OHC 4-CYL Turbo - VINS [4,5,7] >> Overhaul >> Piston & Rod Assembly >> Installation

Piston & Rod Assembly: Installation

To install connecting rods and pistons, reverse removal procedures. See CYLINDER BLOCK  .

NOTE: Each connecting rod has a mating connecting rod cap. Ensure they are assembled correctly by checking their matching number. Position each connecting rod with marked side (stamped) facing forward.
scientia non olet · About LEMON Manuals