Engine Identification
NOTE:
For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION
article in the GENERAL INFORMATION section.
On all models, engine can be identified by 6th character of Vehicle Identification Number (VIN). Turbos are indicated by the 7th character - a "5" indicates GL-10 turbo, a "6" indicates an RX turbo, and a "7" indicates a GL turbo.
The VIN is stamped on a metal plate located on front right side of engine compartment. Identification number of engine is stamped on a machined pad on right front of engine cylinder block.
ENGINE IDENTIFICATION CODES
| Application | (1) VIN Code | ||
|---|---|---|---|
| 2WD | 4 | ||
| 4WD Without Air Suspension | 5 | ||
| 4WD With Air Suspension | 7 | ||
|
|||