Fuel & Temperature Gauges
Disconnect connector from sending unit. Connect the appropriate resistor to connector wire, and ground resistor to body. Gauge should illuminate the number of segments indicated in table.
GAUGE RESISTANCE CHECKS
| Resistor Used | Number of Segments Illuminated | |
|---|---|---|
| Fuel Gauge | ||
| 7 Ohms | 10 | |
| 62 Ohms | 5 | |
| 97-101 Ohms | 1-2 | |
| Temperature Gauge | ||
| 15 Ohms | 9-10 | |
| 47 Ohms | 5-6 | |
| 300 Ohms | 0 | |