LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1985 >> Brat Standard >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic >> Removal & Installation >> Air Compressor & Drier Assembly >> Installation

Air Compressor & Drier Assembly: Installation

Reverse removal procedure for installation. Ensure that all connections are clean and tight. Tighten retainer nuts to 42 INCH lbs. (0.5 N.m).

Fig 1: Air Compressor And Drier Assembly
G51098
NOTE: Air hoses may be attached to drier in any position.
scientia non olet · About LEMON Manuals