LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1984 >> DL 2D Hatchback >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Component Testing >> Fuel Gauge

Fuel Gauge

  1. On all except GL models, turn ignition off. If gauge does not drop below "E", replace it. On all models, unplug fuel tank sender. Connect various resistors between sending unit wire and ground.
  2. A 7 ohm resistor should make gauge read empty, 33 ohm resistor should make gauge read 1/2 full, and a 95 ohm resistor should make gauge read full.
scientia non olet · About LEMON Manuals