LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> Subaru 1.8 5 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [2] & 1.8L 4-CYL - VINS [4,5] >> Removal & Installation >> Crankcase >> Disassembly

Removal & Installation: Crankcase: Disassembly

  1. Remove intake and exhaust manifolds and cylinder heads. Remove oil pump, oil pan and crankcase Allen head plugs. Working through hole in camshaft hole, straighten lock washers and remove bolts.
  2. Position pistons at bottom dead center and remove circlip with long-nosed pliers. Access to No. 1 and No. 2 piston pins is through front crankcase plug holes. Access to No. 3 and No. 4 piston pins is through rear service holes. Remove pins and pistons, marking for reassembly.
  3. To prevent upper crankcase lifters from falling out, use valve lifter clips (899804100). Separate crankcase halves by removing nuts and bolts.
scientia non olet · About LEMON Manuals