LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> Subaru 1.6 2 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [2] & 1.8L 4-CYL - VINS [4,5] >> Removal & Installation >> Valve Timing

Valve Timing

With crankcase halves split, install crankshaft and camshaft so punch mark on camshaft gear is visible through chamfered hole in crankshaft gear.

Fig 1: Aligning Camshaft with Crankshaft
G82168
NOTE: Camshaft gear mark should be visible through crankshaft gear chamfered hole.
scientia non olet · About LEMON Manuals