LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> Subaru 1.6 2 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [2] & 1.8L 4-CYL - VINS [4,5] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake and exhaust manifolds. Remove valve covers, rocker arm shafts and push rods.
    NOTE: Keep push rods in order for installation in original position.
  2. Loosen cylinder head bolts in sequence shown in Fig. Fig 1 . Remove cylinder heads.
Fig 1: Cylinder Head Loosening Sequence
G82165
scientia non olet · About LEMON Manuals