LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> Subaru 1.6 2 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [2] & 1.8L 4-CYL - VINS [4,5] >> Engine Lubrication >> Water Pump >> Disassembly

Water Pump: Disassembly

  1. Remove 4 screws attaching cover plate and gasket. Press pulley off shaft.
    NOTE: To prevent bearing damage, DO NOT  press the shaft. Press the bearing outer race during disassembly or assembly.
  2. Pressing on outer race, press pump shaft from body. Press the impeller from pump shaft, and remove mechanical seal.
scientia non olet · About LEMON Manuals