LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> DL 2D Hatchback >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Component Testing >> Turbo Gauge

Turbo Gauge

  1. Disconnect turbo gauge. Hook up wires of a regulated voltage supply to turbo gauge. When supplied with 1.20-1.22 volts, gauge needle should be at the "-" or no boost position.
  2. When provided with 2.15-2.23 volts, gauge should register at "0" point. When provided with 3.34-3.54 volts, gauge should indicate the "+" position. If gauge responds incorrectly, replace it.
scientia non olet · About LEMON Manuals