LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> Brat DL >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Rear Suspension Assembly >> Disassembly

Rear Suspension Assembly: Disassembly

  1. Remove shock absorbers from trailing arms. Scribe a mark on outer arm and crossmember for reassembly reference. Loosen outer bushing lock bolts.
  2. Remove bolts attaching outer arm to inner arm. Pull outer arm and torsion bar out of crossmember. Repeat for opposite side.
    CAUTION: Take care not to twist or bend torsion bar while removing.
  3. Remove torsion bar from outer arm. Remove inner arm-to-crossmember bolt. Remove inner arm. If inner bushing is worn or damaged, press it out of inner arm, (replace if necessary).
scientia non olet · About LEMON Manuals