LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1982 >> GLF Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1600 & 1800 4-Cylinder >> Engine, Manifolds & Cylinder Head >> Intake Manifold >> Removal

Intake Manifold: Removal

  1. Disconnect negative battery cable. Remove air cleaner assembly. Drain coolant and disconnect all hoses from manifold. Disconnect throttle linkages, vacuum lines, fuel lines and electrical connections to manifold.
  2. Remove EGR pipe from rear of manifold. Remove 6 manifold-to-cylinder head bolts, and remove manifold.
scientia non olet · About LEMON Manuals