LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1982 >> GLF Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1600 & 1800 4-Cylinder >> Engine, Manifolds & Cylinder Head >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake and exhaust manifolds. Remove valve covers, rocker arm shafts and push rods.
    NOTE: Keep push rods in order for installation in original position.
  2. Loosen cylinder head bolts in the sequence shown in Fig 1. Remove cylinder heads.
    Fig 1: Cylinder Head Loosening Sequence
    G09332274Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals