LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1981 >> GLF Automatic Trans >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Rear Suspension - SUBARU >> Removal & Installation >> Rear Suspension Assembly >> Disassembly

Rear Suspension Assembly: Disassembly

  1. Remove shock absorbers from trailing arms. Scribe a mark on outer arm and crossmember for reassembly reference. Loosen outer bushing lock bolts and remove bolts attaching outer arm to inner arm. Pull outer arm and torsion bar out of crossmember. Repeat for opposite side.
    NOTE: Take care not to twist or bend torsion bar while removing.
  2. Remove torsion bar from outer arm. Remove inner arm-to-crossmember bolt and remove inner arm. If inner bushing is worn or damaged, press it out of inner arm.
scientia non olet · About LEMON Manuals