LEMON Manuals: Even more car manuals for everyone
Home >> Sterling >> 1988 >> 825 S, 2.5 C >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Trailing Arm >> Removal

Trailing Arm: Removal

  1. Disconnect negative battery cable. Remove wheel assembly. Remove nut, washer and bushing from front of trailing arm. Remove trailing arm bolt, washer and bushing. See Figure .
  2. Remove trailing arm and hub carrier bracket. Remove bushing and washer from front of trailing arm. Remove adjusting bolt and trailing arm bolt from hub carrier bracket. Remove hub carrier bracket from trailing arm.
scientia non olet · About LEMON Manuals